HEAT DISINFECTION REVERSE OSMOSIS FOR SINGLE DIALYSIS PATIENT CARE IN-CENTER OR AT HOME
The Centurion is an optimal choice for single patient dialysis water treatment in a healthcare facility or at home. This heat disinfection reverse osmosis system can be routinely operated within a hard water environment (routine membrane maintenance dependent), allowing maximum flow rates of 1500 ml per minute as standard. With its sleek, compact design and whisper quiet nocturnal mode, the Centurion is unobtrusive in the home or clinical setting.
- Maximum flow rates of 1500 ml/minute
- The permeate specification exceeds recognized dialysis water treatment standards
- Integrated hot water disinfection of the membrane and loop for enhanced microbiological performance
- Cool drain technology
- Whisper quiet nocturnal mode
- State of the art, touch screen display for easy control Data logging
- Automatic service reminders
- Upgradable software via USB
- Break tank with air gap to protect raw water supply
- Semi-automated chemical cleaning program
- Recirculation and heat disinfection of product water up to the point of use
- Internal leak detection system for peace of mind within the home environment
- .007 ultra-filtration final module provides enhanced microbiological specification
- Audible alarm with mute facility
- Antimicrobial coated fascia
- Anti-tilt
- Optional 20” x 20” cart is available for portability
CERTIFICATIONS
- Entire device conforms to IEC UL standard 60601-1
- FDA 510K / ISO 13485 Registered Medical Device
- Health Canada Medical Device License 88968
SPECIFICATIONS
- Product Output (max): 1500 ml/minute @ 50°F
- Microbiological: <0.1 CFU/ml, <0.03 EU/ml
- Feed Water Total Hardness (max): 400 ppm as CaCO3
- Feed Water Temperature (min/max): 35/95°F
- Feed Water Total Chlorine: 0.1 ppm
- Power Requirements: 115V, 60 Hz, 1 Ph, 12 Amps
- Dimensions In. (W x D x H): 11 x 19 x 34
Operating/Shipping Weight Lbs.: 84/99